IoT Starter Kit
The IoT starter kit is a platform used to demonstrate the capabilities of the BrioSens. This page will guide you through the initial hardware setup, configuration and demonstrate how to use the BrioSens to monitor various sensors.
Kit Overview
ID | Analog Input # | Digital Input # | Component Description | Vendor | Part # |
---|---|---|---|---|---|
1 | - | - | BrioSens US LTE Fallback 3G with internal antennas | Briowireless | BSNS-43G1-US-BIW |
2 | - | - | 12V 1A DC Power Supply | CUI INC | SWI10-12-N |
3 | 1 | - | Load Cell 5kg | Phidgets | 3133 |
4 | - | - | Module Instrumentation Amplifier | Briowireless | BW123B-REV100A |
5 | 2 | - | Module Grove Temperature Sensor V1.2 | SeeedStudio | 101020015 |
6 | 3 | - | Module Grove Slide Potentiometer | SeeedStudio | 101020036 |
7 | - | 1 | Limit Switch A2 Module | Afinibot | MIC-XWKG |
8 | - | - | Power Supply 5V 3A | Phi Robotics | H-PWR-VRG-1 |
For the next steps, please refer to the BrioSphere Cloud section.